CF1200

CF1200 has been designed for use in factory-assembled counterflow towers in HVAC and light industrial applications. It can also be used as a distribution pad in 3.9” (100 mm) and 5.9” (150 mm) depths where the water contains very low levels of total suspended solids. CF1200 splits the water stream ten times in an 11.8-inch (300 mm) vertical path, balancing high thermal performance and low pressure drop.

Benefits

Available in material meeting Cooling Technology Institute (CTI) Standard 136

Available with AccuShield technology

Available with Mechanical Assembly technology

Navigate Within Cross-Fluted Fills

CF1200 Film Fill Features

Two horizontally aligned, colored cylinders featuring the CF1200. The top cylinder is labeled "Efficiency" and is fully filled with blue. The bottom cylinder, labeled "Fouling Resistance," is filled with green for half its length, while the rest remains white.

Highly Efficient

Cross-fluted fills offer the highest level of efficiency of all film fill designs, improving heat transfer and maximizing overall tower performance.

Diagram showing a water droplet at the top, with red arrows pointing upward and blue arrows pointing downward. A blue box labeled "AIR" is at the bottom. The background features a diamond pattern, and smaller water droplets appear below the CF1200 box.

Improved Water Distribution

The engineered microstructure incorporated into cross-fluted fills enhances water distribution and thermal mixing.

Dedicated Bond Points

Brentwood’s cross-fluted fills feature bonded edges for added media strength and durability.

Beveled Tips

Beveled tips are incorporated into the cross-fluted design to promote drainage at the fill pack interfaces.

Mechanical Assembly

Brentwood’s Mechanical Assembly technology has been improved for the production of ThermaCross, yielding connections that are 50% stronger than glued.

Cross-Fluted Film Fill Specifications

English Metric

Products	Surface Area ft2/ft3	Sheet Spacing inches	Flute Angle Degrees (˚)	Sheets Per Ft	Pack Sizes Minimum D/W/L inches	Pack Sizes Maximum D/W/L inches	Pack Sizes Standard D/W/L inches	Nominal Gauge mils	Dry Weight lbs/ft3
CF1200	69	0.46	30	26	D: 3.9 W: 6 L: 12	D: 11.8 W: 12 L: 120	D: 11.8 W: 12 L: 48, 72, 96, 120	8 or 10	2.4 or 2.8
ThermaCross	47	0.75	22	16	D: 5.9 W: 5.9 L: 12	D: 23.625 W: 23.625 L: 144	D: 11.8 or 23.625 W: 11.8 L: 72, 96, 120	10 or 15	1.7 or 2.4
CF1900	48	0.75	31	16	D: 6 W: 6 L: 12	D: 24 W: 24 L: 12	D: 12 or 24 W: 12 or 24 L: 48, 72, 96, 120	10 or 15	1.7 or 2.4
CF1900SS	48	0.75	27	16	D: 12 W: 6 L: 24	D: 12 W: 12 L: 72	D: 12 W: 12 L: 48, 72	10 or 15	1.7 or 2.4
CFS3000	31	1.18	30	10	D: 12 W: 6 L: 12	D: 24 W: 24 L: 12	D: 24 W: 12 or 24 L: 48, 72, 96, 120	15	1.7

Products	Surface Area m2/m3	Sheet Spacing mm	Flute Angle Degrees(˚)	Pack Sizes Minimum D/W/L mm	Pack Sizes Maximum D/W/L mm	Pack Sizes Standard D/W/L mm	Nominal Gauge mm	Dry Weight kg/m3
CF1200	226	11.7	30	D: 100 W: 153 L: 305	D: 300 W: 305 L: 3048	D: 300 W: 305 L: 1220, 1829, 2439, 3048	0.20 or 0.25	38.4 or 44.9
ThermaCross	154	19	22	D: 150 W: 150 L: 305	D: 600 W: 600 L: 3658	D: 300 or 600 W: 300 L: 1829, 2439, 3048	0.25 or 0.38	27.2 or 38.4
CF1900	157.5	19	31	D: 153 W: 153 L: 305	D: 610 W: 610 L: 3658	D: 305 or 610 W: 305 or 610 L: 1220, 1829, 2439, 3048	0.25 or 0.38	27.2 or 38.4
CF1900SS	157.5	19	27	D: 305 W: 153 L: 610	D: 305 W: 305 L: 1829	D: 305 W: 305 L: 1220, 1829	0.25 or 0.38	27.2 or 38.4
CFS3000	102	30.5	30	D: 305 W: 153 L: 305	D: 610 W: 610 L: 3658	D: 610 W: 305 or 610 L: 1220, 1829, 2439, 3048	0.38	27.2